[ANYKERNEL] [OP5] [OOS 4.5.x] Boeffla-Kernel Version 1.0-beta6 (20.07.2017)

  • [ANYKERNEL] [OP5] [OOS 4.x.x] Boeffla-Kernel Version 1.0


    boeffla_kernel_256.png



    Wichtig:

    • Dieser Kernel ist nur für OOS 4.x.x und für nichts anderes !!!!
    • Für die Konfiguration des Kernels, bitte die App Boeffla-Config V2 nutzen: *Link ausgeblendet*
      Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier, andere 3rd party apps können den vollen Funktionsumfang des Kernel nicht ausschöpfen !!!

    Wie immer gilt: android-hubo.de oder ich übernehmen keinerlei Haftung für Schäden jeglicher Art !!! Flashen wie immer auf eigene Gefahr !!!
    (Fehlerhafte und nicht mehr funktionierende Geräte können an HUBO gesendet werden, wir freuen uns über jede Spende!)


    Download


    Installationsanleitung


    Viel Spaß

    Phones: OnePlus 5, 3T, 3, 2, 1, X / Galaxy S5, S3 / n80xx, n5xxx


    *Link ausgeblendet*
    Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier
    Du möchtest meine Arbeit unterstützen? *Link ausgeblendet*
    Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier

  • Version 1.0-alpha1


    28.06.2017



    • First unofficial build
    • Note: This kernel only runs on OOS 4.x.x for the OnePlus 5 - nothing else !!!
    • Note: You need at least version 2.4.38 of Boeffla-Config V2 to allow all functionalities to be available
    • Features:
      • Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
      • Full integration with Boeffla-Config V2 (you need at least version 2.4.38 or higher !!!) configuration app (get it from *Link ausgeblendet*
        Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier) to configure all kernel settings
      • Dash charging fully supported
      • The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
      • Additional governors: none yet, but planned
      • Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid and zen
      • Underclocking CPU and GPU supported
      • No CPU overclocking and voltage interface, no GPU overclocking and voltage interface (not planned too)
      • GPU boost implemented (4 levels)
      • CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
      • Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
      • Dynamic FSync (activated if screen on, deactived if screen off), configurable
      • Input boost frequencies and duration configurable per CPU cluster, input boost switch
      • Show CPU frequency usage per CPU and frequency in Boeffla-Config
      • Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
      • Show GPU frequency usage per frequency in Boeffla-Config
      • KCal V2 Color control
      • Swipe2wake gestures
      • Control haptic feedback of gestures (except fingerprint)
      • Swipe2sleep gestures
      • SD card read ahead buffer configurable (default increased to 1024 kB)
      • Ext4 File system tweaks (default to on, can be disabled)
      • Kernel logger (dmesg) configurable
      • CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
      • NFS read-only support (module)
      • NTFS support (module)
      • XBox support (module)
      • OTG-Ethernet support (module)
      • TCP Congestion changed to Westwood
      • Many additional TCP congestion algorithms available
      • Entropy values configurable
      • Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
      • Swap supported
      • Various kernel tweaks
      • Doze mode configurable in Boeffla-Config
      • Full selinux strict support (switchable to permissive on demand)
      • Show speedbin information (PVS level) in Boeffla-Config app
      • init.d support (in /system/etc/init.d - set correct permissions!)
      • Automatic EFS backup
      • Fully supports OOS device encryption, but does not force it
      • Integrated full busybox 1.26.2 (own compilation)
      • Compatible with systemless root
      • Safetynet: verifiedbootstate + additional flags removed
      • Kernel initialisation log file (with history of 3 log files)
      • Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
      • Google gcc 4.9 toolchain (64 bit) used for best stability
      • Always based on latest OOS kernel sources (*Link ausgeblendet*
        Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier)
    • Planned future features:
      • Additional governors
      • Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
      • Haptic feedback intensity control
      • Bump USB default charge rate up to 900mA

    Phones: OnePlus 5, 3T, 3, 2, 1, X / Galaxy S5, S3 / n80xx, n5xxx


    *Link ausgeblendet*
    Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier
    Du möchtest meine Arbeit unterstützen? *Link ausgeblendet*
    Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier

  • Version 1.0-beta1


    30.06.2017



    • First official build
    • Note: This kernel only runs on OOS 4.x.x for the OnePlus 5 - nothing else !!!
    • Note: You need at least version 2.4.38 of Boeffla-Config V2 to allow all functionalities to be available.

      Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
      as on OOS 4.5.x a suspected bug does not let the app do that for you although the app tries !!!
    • Features:
      • Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
      • Full integration with Boeffla-Config V2 (you need at least version 2.4.38 or higher !!!) configuration app (get it from *Link ausgeblendet*
        Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier) to configure all kernel settings
      • Dash charging fully supported
      • The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
      • Additional governors: none yet, but planned
      • Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid and zen
      • Underclocking CPU and GPU supported
      • No CPU overclocking and voltage interface, no GPU overclocking and voltage interface (not planned too)
      • GPU boost implemented (4 levels)
      • CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
      • Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
      • Dynamic FSync (activated if screen on, deactived if screen off), configurable
      • Input boost frequencies and duration configurable per CPU cluster, input boost switch
      • Show CPU frequency usage per CPU and frequency in Boeffla-Config
      • Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
      • Show GPU frequency usage per frequency in Boeffla-Config
      • KCal V2 Color control
      • Swipe2wake gestures
      • Control haptic feedback of gestures (except fingerprint)
      • Swipe2sleep gestures
      • SD card read ahead buffer configurable (default increased to 1024 kB)
      • Ext4 File system tweaks (default to on, can be disabled)
      • Kernel logger (dmesg) configurable
      • CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
      • NFS read-only support (module)
      • NTFS support (module)
      • XBox support (module)
      • OTG-Ethernet support (module)
      • TCP Congestion changed to Westwood
      • Many additional TCP congestion algorithms available
      • Entropy values configurable
      • Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
      • Swap supported
      • Various kernel tweaks
      • Doze mode configurable in Boeffla-Config
      • Full selinux strict support (switchable to permissive on demand)
      • Show speedbin information (PVS level) in Boeffla-Config app
      • init.d support (in /system/etc/init.d - set correct permissions!)
      • Automatic EFS backup
      • Fully supports OOS device encryption, but does not force it
      • Integrated full busybox 1.26.2 (own compilation)
      • Compatible with systemless root
      • Safetynet: verifiedbootstate + additional flags removed
      • Kernel initialisation log file (with history of 3 log files)
      • Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
      • Google gcc 4.9 toolchain (64 bit) used for best stability
      • Always based on latest OOS kernel sources (*Link ausgeblendet*
        Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier)
    • Planned future features:
      • Additional governors
      • Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
      • Haptic feedback intensity control
      • Bump USB default charge rate up to 900mA

    Phones: OnePlus 5, 3T, 3, 2, 1, X / Galaxy S5, S3 / n80xx, n5xxx


    *Link ausgeblendet*
    Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier
    Du möchtest meine Arbeit unterstützen? *Link ausgeblendet*
    Bitte registriere oder Melde Dich an um alle Links im Forum zu sehen. Klick dazu hier

  • Und ab gehts Mädels ^^


    Screenshots der ersten beta unseres Kernel Maestros :rock:

  • Version 1.0-beta2


    04.07.2017



    • New: Boeffla-Sound version 1 implemented (headphone volume control only for now)
    • New: Haptic feedback control (applying a factor to the vibration strength of the rom, 0=vibration off, 25= vibration on 100%)
    • New: USB charge rate bumped up to 900 mA as default
    • New: Kernel configuration and compiler flags changed to switch off kernel size optimization (in favor of speed)
  • daywalk3r666

    Hat den Titel des Themas von „[ANYKERNEL] [OP5] [OOS 4.5.x] Boeffla-Kernel Version 1.0-beta1 (30.06.2017)“ zu „[ANYKERNEL] [OP5] [OOS 4.5.x] Boeffla-Kernel Version 1.0-beta2 (04.07.2017)“ geändert.
  • Danke Das. Bin gerade unterwegs. Und endlich Boeffla Sound :)


    Und Vielen Dank für das Update, Andi :)

  • The_Voice_70

    Hat den Titel des Themas von „[ANYKERNEL] [OP5] [OOS 4.5.x] Boeffla-Kernel Version 1.0-beta2 (04.07.2017)“ zu „[ANYKERNEL] [OP5] [OOS 4.5.x] Boeffla-Kernel Version 1.0-beta3 (05.07.2017)“ geändert.
  • Version 1.0-beta3


    04.07.2017



    • Note: This kernel version is optimized to be used with OOS version 4.5.5
    • Update: Implemented OnePlus kernel source drop for OOS 4.5.5 as of 05.07.2017
    • Update: Notification LED control dirver updated to version 1.1.c (LED speed set to 1 creates solid LED for notifications)
    • New: Added blu_active governor (credits to engs
  • Das schnellste Update der Oneplus Geschichte überhaupt bei mir;-)


    4.5.5 ist drauf mit beta3 und flitzt erst einmal. Danke sehr, Andi ;-)

  • Ja, der Kernel ist der Hit. Ich komme auf unglaubliche Laufzeiten unter interactive ) interactive battery extreme. Komplett gaga.

  • Habe jetzt noch 16,% und 9h 22min Screen On Time.

  • Laufzeit 24 Stunden bisher.4 Stunden Rest. Zwischen 10 und 11 SOT werden locker erreicht werden. Konsequent Aggressive Doze in Greenify Donation an. Alles eingefroren inklusive WhatsApp. Sprich allen Akkusaugern den Hahn zugedreht.

  • Gerade so Dinger wie WhatsApp ziehen einfach. Und es kann echt entspannend sein wenn man selber schauen kann ohne das alle Nase lang Nachrichten durchkommen. :D

  • Final Destination....

  • Sieht auf den ersten Blick erst einmal sportlich aus :)